Thursday, March 2, 2017

Explanation of Error Message on the Login Page Hotspot Mikrotik

Mikrotik Hotspot Login page appears an error message when you want to log into Mikrotik Hotspot. What should we do? Hold her questions. There are several error messages that can appear when we want to login to the Hotspot Mikrotik. Each hotspot error message mikrotik have causes and solutions vary. Let us see and learn first any error messages that can appear on Mikrotik hotspot and what the problem is. 

Solusi pesan error ketika login hotspot mikrotik
There are two types of error messages on the hotspot proxy , ie fatal errors and non-fatal error. Fatal error appears in a separate HTML file that is named error.html. While non-fatal error basically shows the user when logging errors, and displayed on the login page (usually appears under the login form).
Let us refer to some explanation Error Message in Mikrotik Hotspot Login page :

General non-fatal errors:

    You are not logged in:
    This error message appears when we try to access the status page (http: // iphotspot / status) or try to log off when the account we're not logged in
    Solution: login
    Already Authorizing, retry later:
    The authentication process is still in progress, while the user is asked to authenticate again, whereas the previous process has not been completed.
    Solution: Wait until the process is complete, then try again.

    Chap-missing = web browser did not send a challenge response (try again, enable JavaScript):
    Users trying to log in with the HTTP method-CHAP uses MD5 hashes, but do not know challange HotSpot server that is used for the hash. This can happen if we pressed the Back button on your web browser; If JavaScript is not enabled in the web browser; if the page login.html invalid; or if the value challange has expired on the server (more than 1 hour of inactivity).
    Solution: instructs the browser to reload (refresh) login page usually helps if JavaScript is enabled and login.html page is valid.

    Invalid username ($ (username)): this MAC address is not yours:
    Users trying to log in using the username MAC address that is different from the MAC address of the user who should be.
    Solution: MAC Address used at the user when the login must match the existing database on the server hotspot. Please hibungi manager hotspot if this error message appears.

    Session limit Reached ($ (error-orig)):
    This error message appears when the hotspot user is already running out of session. This occurs when the hotspot user login time constrained her, eg the user Trial is limited only 10 minutes to login.
    Solution: Wait for a while, then try to log in again. If the error message still appears her, contact manager hotspot to ensure your users do not dilimit his session.

    Hotspot service is shutting down:
    Systems on RouterOS (hotspot server) is fit again to restart or shutdown.
    Solution: Wait until its hotspot service can be used again

    General fatal errors:

      Internal error ($ (error-orig)):
      This error message should never have happened. But if it appears, error.html page will display this error message (error-orig will describe what happened). 
      Solution: Fix the error reported in the error message (this is done by the manager hotspot)

      Configuration error ($ (error-orig)):
      No that is not true in the setting of its Hotspot Server, so the error message (error-orig will describe what happened).  
      Solution: Fix the error reported in the error message (this is done by the manager hotspot)

      Can not assign IP addresses - no more free addresses from pool:
      Users can not obtain an IP Address of IP Pool supplied Hotspot Server, because there is no longer available IP Address (IP Address is exhausted / used all)
      Solution: Make sure the Server IP Address Hotspot it has enough on its IP Pool. If the user eg her too much of the IP Address provided, can use 2 Server Hotspot.


      Local HotSpot database user non-fatal errors:

        Invalid username or password
        This error message appears if the user entered his username or password.
        Solution: check again his username and password, make sure it is correct.
          User $ (username) is not allowed to log in from this MAC address
          Users trying to log in from a different MAC address in the User Database Server Hotspot. 
          Solution: Login with the appropriate MAC Address, MAC Address or remove limitations on its Hotspot Server.

          user $ (username) has Reached uptime limit:
          This error message appears when the user is restricted its uptime and had crossed the line uptime limit.
          Solution: Ask the manager hotspot to eliminate its limit uptime

          user $ (username) has Reached traffic limit and limit-bytes-in or limit-bytes-out:
          Almost the same as the previous error messages, user traffic in the limit on Server hotspot.
          Solution: Ask the manager hotspot to eliminate its limit traffic

          no more sessions are allowed for user $ (username) :
          This error message appears because of the many specific username can login simultaneously is up. For example a user can be used by 10 people, if people want to login to 11 guests use this username will appear this error message because it is limited to the amount of its shared-users.
          Solution: Wait until the other user with the username to log out, or try to login to use another user who shared-users is still available.


          RADIUS client non-fatal errors:

            invalid username or password: 
            RADIUS servers reject the username and password entered due to an error in the username or the password.

            Solution: Please check the username and password are entered, if it is correct but still can not login, contact manager hotspot to check the user log RADIUS Server. 

            <error_message_sent_by_radius_server>: 
            Consult your RADIUS server documentation for more information 

            RADIUS client fatal errors:

              RADIUS server is not responding 
              This error message appears because the RADIUS RADIUS server can not be accessed by the user, so the user does not get a response from the authentication process that is requested of him.
              Solution: Try to check whether its RADIUS server actually running and can be accessed from the Hotspot Server. 

              Thus some of the error messages that may appear when we log into the hotspot mikrotik along with its brief explanations and solutions. Hope can help you frequently come across an error message mikrotik hotspot login page that.

              No comments:

              Post a Comment